Magsafe Dock

Assembly Instructions

Step 1: Attach the MagSafe charger to the wood base.

Parts needed: Wood base, Apple MagSafe charger

Remove the clear film from the nano suction pad. (Using a piece of tape makes it easy.)

Place the MagSafe cable onto the newly exposed nano suction pad.

Step 2: Mount your dock.

Remove the clear film from the bottom of the dock. (Again, tape is your friend.)

You're finished! *Note* If the micro-suction pads ever lose their stickiness, you can “clean” them with a piece of tape to remove dust, or more thoroughly with soapy water.